What’s Inside a Washing Machine? Scrap Metals You Can Sell Now

how much copper is in a washing machine

If you manage rental units, run an appliance removal crew, or clear out foreclosed properties, how much copper is in a washing machine is a smart question to ask before your next haul-away. The honest answer is less than most people expect, but the machine still carries real scrap value once you count the steel cabinet, drum, motor, and wiring. This guide breaks down what is inside, what it pays, and how to answer the practical question every property pro asks: can you scrap a washing machine?

How Much Copper Is in a Washing Machine?

A typical household washer contains roughly one to two pounds of copper, mostly in the motor windings, the wiring harness, and small connectors. The exact amount depends on the brand, age, and model. Older, heavier machines usually hold more copper than newer, lightweight designs.

Most of that copper sits inside the drive motor, wrapped around a steel core. Wiring harnesses, the control board leads, and the water inlet valve coils add a smaller share. Some budget models use aluminum windings instead of copper, which lowers the payout, so it pays to check before you quote a price.

Here is why this matters for a business. Copper is the most valuable metal in the machine by weight, but it is a small slice of the total. A washer weighs well over 100 pounds, and the copper may be only 1 to 2 percent of that. If you sell the unit whole, you are mostly being paid for steel. If you pull the motor and wiring first, you can capture the higher copper rate separately.

For a deeper breakdown of every metal category inside the unit, see how much scrap metal is in a washing machine. The International Copper Association notes that copper can be recycled repeatedly without losing its properties, which is a major reason scrap buyers keep paying for it. That recyclability also explains why even small amounts of copper are worth separating when you handle appliances in volume. When people ask how much copper is in a washing machine, the useful follow-up is whether the labor to extract it fits your volume.

Where the copper hides inside the machine

Look at the motor first, then the wiring harness running from the control panel, then the pump and water valve coils. Pulling the motor is usually the fastest way to recover the bulk of the copper.

What Other Metals Are Inside a Washing Machine?

A washing machine is mostly steel by weight, with the outer cabinet, frame, and inner tub making up the majority. Front-loaders often include a stainless steel drum, which earns a higher rate. Smaller amounts of aluminum, brass fittings, and copper round out the recoverable metals.

Steel is the volume play. The cabinet, frame, and base can account for well over half the machine’s weight, and the U.S. EPA reports that roughly 90 percent of the steel in major appliances is recycled, which keeps demand for appliance steel steady. Stainless drums in front-loading models are worth separating because stainless pays more per pound than ordinary steel.

Brass shows up in hose fittings and water valves, and aluminum can appear in pulleys, brackets, and some motor housings. These are small pieces, but they add up when you process dozens of units from a property cleanout.

Not everything in the machine is scrap. Many front-loaders carry concrete counterweights, and plastic components, rubber seals, and glass doors have no scrap value. Weigh these out before you quote a payout, because a yard will not pay metal rates for concrete. Knowing the full material mix also helps you decide whether to sell whole or dismantle, and the guide on which scrap metal pays the most shows how the categories compare. Understanding how much copper is in a washing machine only gets you part of the picture; the steel, stainless, and brass determine most of the total.

scrap metal recycling

Can You Scrap a Washing Machine?

Yes. Scrap yards and metal recyclers accept washing machines, either whole or dismantled. Selling whole is faster, while stripping out the copper motor and wiring first usually earns more. Washers contain no refrigerant, so they are simpler to process than refrigerators or air conditioners.

So can you scrap a washing machine without special permits? In most cases, yes, but there are a few things to confirm first. Business sellers should ask about the buyer’s appliance policy, whether a valid ID or business documentation is required, and whether the yard weighs the machine whole or pays by category after dismantling. Rules differ by state and by yard, so a quick call saves a wasted trip.

Preparation also matters. Drain any remaining water, remove the power cord if you plan to sell it separately as copper wire, and take out concrete blocks, plastic panels, and glass. Clean, well-sorted loads get better pricing and fewer deductions at the scale.

For a fuller look at what businesses can recover from a single machine, read the detailed guide on how much metal businesses can retrieve from a washing machine. If you are weighing whether to dismantle in-house, remember that the answer to can you scrap a washing machine is always yes, but the better question is whether the extra labor beats the whole-unit price. For high-volume sellers, the answer often depends on how many units you handle per week.

How Much Is a Washing Machine Worth as Scrap?

A whole washing machine typically sells for a modest amount, often somewhere between a few dollars and around twenty dollars, depending on weight and current steel prices. Dismantling to sell copper, stainless, and brass separately can raise that figure, though prices change daily, so always confirm current rates.

Here is an illustrative example, not a price quote. A 150-pound washer sold as mixed appliance steel at five to ten cents per pound brings in roughly $7.50 to $15. Now add the motor and wiring. If you recover about 1.5 pounds of copper and sell it at a copper rate that is several times higher than steel, the copper alone can add a few dollars to the total.

That may sound small, and for one unit it is. The value shows up in volume. A property manager clearing 40 machines from an apartment renovation, or a junk removal crew handling 15 appliances a week, turns a minor per-unit gain into a meaningful monthly line item. The U.S. Geological Survey estimates that recycled material supplies roughly one-third of U.S. copper consumption, which is why scrap buyers compete for clean copper and why recovering it from appliances pays off at scale.

Three factors move your payout the most:

Weight and metal type decide the base price. Cleanliness decides how much gets deducted. Timing decides the rate, since scrap prices shift with commodity markets. Checking current rates before each load protects your margin, and when you are curious about how much copper is in a washing machine relative to its total value, remember that the steel usually delivers the larger share of the check.

How Should Businesses Prep and Sell Washing Machine Scrap?

Start by deciding whether to sell whole or dismantle. Remove non-metal materials, separate the copper motor and wiring, group steel, stainless, and brass, and call the buyer for current pricing. Selling in bulk from a single location also reduces your per-unit handling cost and hauling expense.

A simple workflow keeps things efficient. Pull the machines to one staging area, remove concrete counterweights and plastic, and pop the motor and harness. Sort the metal into clean piles so the yard can grade each category at the scale. If you need a refresher on sorting, this guide on how to separate scrap metal covers the basics.

Next, think about logistics. A single washer fits in a truck bed, but a full cleanout does not. Planning pickup or delivery ahead of time prevents delays, and professional scrap metal hauling can take the load off your crew when volume gets heavy.

Finally, pick the right buyer. A good buyer weighs transparently, explains deductions, and pays promptly. Comparing a few options takes about ten minutes and can improve your return noticeably. If you are not sure who to call, the overview on where to sell scrap metal walks through your options. Businesses that ask how much copper is in a washing machine usually end up asking the same follow-up: who will pay the best price for it, and the answer is a buyer who grades honestly and pays on time.

Got Washers Piling Up? Turn Them Into Cash.

Skip the guesswork on copper, steel, and stainless. Tell ScrapGo what you have and get paid fairly for every pound.

Get My Washer Scrap Quote

Final Takeaways for Scrap Sellers

A washing machine holds only a pound or two of copper, but the combination of copper, stainless, brass, and steel makes it worth scrapping, especially in volume. Sort carefully, remove non-metal parts, confirm current rates, and sell to a transparent buyer to maximize your return.

The most useful way to think about how much copper is in a washing machine is as one piece of a larger material picture. The copper gives you a bonus, the steel gives you volume, and clean preparation gives you leverage at the scale. When a client or colleague asks can you scrap a washing machine, the clear answer is yes, and the smart follow-up is how to do it with the least labor and the best payout.

If your business handles appliances regularly, build a repeatable process: stage, strip, sort, weigh, and sell. Even small improvements in that workflow compound across dozens of machines. With the right preparation and a reliable buyer, a pile of old washers turns into predictable scrap revenue instead of a disposal cost.

FREQUENTLY ASKED QUESTIONS

Most household washers contain about one to two pounds of copper, mainly in the motor windings and wiring harness. Amounts vary by brand, age, and whether the motor uses copper or aluminum windings.

Yes. Scrap yards accept washing machines whole or dismantled. Whole units sell faster, while removing the copper motor and wiring first usually earns more. Payouts depend on weight, metal type, and current scrap prices.

Dismantling usually pays more because copper, stainless steel, and brass sell at higher rates than mixed appliance steel. Whole units save labor, so the better choice depends on your volume and available time.

The copper motor and wiring harness carry the highest per-pound value. Stainless steel drums, found in many front-loaders, come next, followed by brass fittings and aluminum parts before standard steel.

Yes. Drain water and remove concrete counterweights, plastic, rubber seals, and glass doors. These have no metal value, and leaving them in can reduce your payout or trigger deductions at the scale.

Often yes. Washers may include stainless drums and heavier motors, while dryers are lighter with less copper. Yards price by metal type and weight, so call ahead for current appliance rates.

Other Blog Posts

Nov 06
Where to Get Scrap Without Chasing Loads Every Day

Quick answer: The most dependable answer to where to get scrap is a set of recurring sources: construction and demolition sites, manufacturing plants, auto repair shops and fleets, trade contractors, property managers, scrap yards, and online marketplaces such as ScrapGo. Written pickup agreements with these sources deliver steadier volume than one-off calls. Many scrap buyers […]

Nov 04
Where to Sell Scrap Metal Today: Compare Offers From Vetted Buyers

Quick answer: Businesses should sell scrap metal to licensed buyers who price by sorted grade, use certified scales, and put offers in writing. Comparing at least three offers on the same load is the most reliable way to earn more. ScrapGo, a B2B scrap marketplace, lets sellers compare offers from vetted buyers in one place. […]